Centrifugal Spinning Pole Machines Operation Requirements and Characteristics
Centrifugal Spinning machine is the necessary equipment to make reinforced and prestressed concrete electric poles. When Concrete electric pole mold is equipped with a certain number of steel skeleton and concrete, the centrifuge drives the concrete pole mold from slow to fast rotation, the concrete in the spc pole mold due to centrifugal force, After a certain period of time and steel bonding, and tightly adsorbed in the steel mold wall, dense, after curing into a cement pole. Centrifugal molding machine mainly by the wheel, the drive shaft, driven shaft, bearing seat, pulley, base, electromagnetic speed motor composition.
Centrifugal spinning concrete pole machine should be consistent with the "cement products industry with centrifugal molding machine technical conditions" requirements, the performance of the centrifuge to be good, solid and durable, smooth operation, and should meet the process design speed requirements. The diameter of the wheel and the height of the vertex, the horizontal and coaxial degrees of the common axis of the wheel, the error of the parallelism of the adjacent two axles (ie, the consistency of the same side of the wheel) Is the production of reinforced concrete pole equipment, when the cement pole mold installed a certain number of steel skeleton and concrete, the centrifuge driven by the mold from slow to fast rotation, concrete in the steel mold due to the role of centrifugal force, after a certain time and steel Bonding, and tightly adsorbed in the steel mold wall, dense, after curing into a cement pole. Centrifugal molding machine mainly by the wheel, the drive shaft, driven shaft, bearing seat, pulley, base, electromagnetic speed motor composition.
When the centrifugal force generated by the rotation of the rod shaft is equal to or slightly larger than the self-gravity of the concrete, the concrete can overcome the influence of gravity, and the sedimentation is far away from the rotation center. When the speed continues to rise, the centrifugal force in the concrete mixture of various materials in the direction of centrifugal force squeezed into the wall around the wall, to achieve uniform and high strength molding.The center distance of wheel should be determined by the angle between the pole and the wheel concrete spun pole mold. The angle of 75-110 ° of the steel mold center should be 90 °.