FRT XG1500 Roller Suspension Concrete Pipe Machine make concrete compacted with pressure and centrifuge force generated by roll shaft and concrete pipe mould. Concrete pipe strength will reach standard strength after steam curing or natural maintaining to form concrete pipe, concrete pipe with inner diameter 300-2400mm, length 1000-5000mm can be produced with this kind of concrete culvert pipe machine. The average efficiency is 10 minutes per concrete pipe. Easy operation, steady operation, reliable and durable, and low failure rate are the advantages of FRT XG1500 Roller Suspension Concrete Pipe Machine.
FRT XG1500 Roller Suspension Concrete Pipe Machine
concrete pipe with 0.8-1.5m diameter Flat joint ,tongue and groove joint, bell&spigot joint
concrete pipe with 2m length Flat joint, tongue and groove joint, bell&spigot joint can be produced
55kw new motor is the standard configuration for the equipment, refuse to use the motor repaired from the old ones
Roll shaft diameter(mm)
Φ325，specified technical treatment, roll shaft break is thorough solved
Roll shaft screw speed(r/min)
65-653，frequency cabint has good efficiency
6-8 pieces concrete pipe with any types can be produced in one hour
5-6 workers are required to work together
1.Short production cycle: concrete forming effect is very good as it is pressed with the roll shaft directly, so shorter time is needed.
2.Roller Suspension Concrete Pipe Machine produces drainage concrete pipes with hard concrete, no waste of concrete slurry,less material wasting and no pollution of the environment.
3.Low noise when producing, maybe 80-90db.
4.Outer pressure strength of the concrete pipe and production efficiency is high.
1.Power light brights after the machine switches on power.
2.People are forbidden to stay at the both sides of concrete pipe machine to avoid hurting from the flying stone when main concrete culvert pipe machine is running.
3.Speed up slowly and steady when adjusting speed controller, do not adjust to required speed directly.
4.when concrete is almost enough for concrete pipe forming ,even concrete feeding process should be avoided concrete pipe mold jumping with uneven concrete distribution
5.Hoisting concrete culvert pipe mold first, and loosen the bolts on the back bearing seat, open the roller suspension machine gate when hoist concrete pipe mold away from roller suspension machine. Remember, roll shaft should not stand without any support.
6. Protect instrument, correct demolding and right hoisting method should be guarantee when demolding, in order to avoid damage the structure and the shape of concrete pipe.
7.Do not repair when concrete pipe machine is running.
8.One concrete pipe machine can produce specified range concrete culvert pipe. Do not overload operating, avoid damaging the transmission mechanism .
9.water in concrete is the most important one to pay attention in mixing process, more or less of water will make concrete pipe failure to form.
TAG:   concrete pipe machine